This guide provides step-by-step instructions for installing a Frigidaire LP Conversion Kit. This kit allows you to convert your Frigidaire gas range from using natural gas to liquid propane. It includes all the necessary components and instructions. Make sure to order the correct kit for your appliance, as they are specific to each product. The installation process is simple and can be done by anyone with basic mechanical skills. Follow these instructions carefully to ensure safe and proper operation of your range.
Introduction
This guide provides step-by-step instructions for installing a Frigidaire LP Conversion Kit, allowing you to convert your Frigidaire gas range from using natural gas to liquid propane. This kit is designed to be user-friendly and includes all the necessary components for a successful conversion. It’s important to note that these instructions are specific to Frigidaire gas ranges, and may not be suitable for other brands. Before you begin, ensure you have the correct kit for your appliance model. You can find the model number on the appliance’s identification label, usually located on the inside of the oven door or on the back of the range. Once you have the correct kit, you can proceed with the installation process, following these instructions carefully for a safe and efficient conversion.
Safety Precautions
Before you begin the installation process, it is crucial to prioritize safety. Always disconnect the electrical power to your range at the main circuit breaker or fuse box before starting any work. This ensures you are not working with live electricity. Always double-check that the gas supply is turned off at the main valve before disconnecting any gas lines. Ensure adequate ventilation in the area where you’re working, as propane gas is flammable. Wear appropriate safety gear, including gloves and eye protection, to avoid injury from sharp edges or tools. If you are uncomfortable with any part of the installation process, it is always advisable to consult a qualified appliance technician for assistance. By following these safety precautions, you can ensure a safe and successful installation of your Frigidaire LP Conversion Kit.
Tools and Materials
Before you begin the installation process, make sure you have all the necessary tools and materials. You’ll need a Phillips head screwdriver, a 5/8 wrench, a 1/2″ socket wrench, and a gas leak detector fluid or soapy water. The LP Conversion Kit itself will contain all the necessary components for the conversion, including a new regulator, orifice, and instructions. It’s helpful to have a small container for the soapy water or gas leak detector fluid, and a clean cloth for wiping up any spills. Make sure to have a clear workspace, and keep all tools and materials within reach. Having everything prepared beforehand will make the installation process smoother and more efficient.
Step 1⁚ Locate the Regulator
The first step is to locate the pressure regulator on your range. The regulator is typically found near the gas inlet valve, which is located on the back or bottom of the range. It may be covered by a small access panel or simply visible. The regulator is usually a cylindrical device with a connection for the gas line and a connection for the range’s gas line. It may have a label or marking identifying it as the pressure regulator. If you have difficulty locating the regulator, consult the owner’s manual for your range or contact Frigidaire customer support for assistance. Once you’ve located the regulator, you’re ready to proceed to the next step of the installation process.
Step 2⁚ Remove the Regulator
Before removing the regulator, it’s crucial to ensure that the gas supply is turned off at the main gas valve. This is essential for safety and preventing any potential gas leaks. Once the gas supply is off, you can proceed with removing the regulator. Depending on your range model, the regulator may be secured with a single nut or multiple fasteners. Use a wrench of the appropriate size to loosen and remove the nut or fasteners. Carefully detach the regulator from the gas line and the range’s gas line. Be cautious not to damage the regulator or the gas lines during the removal process. Once the regulator is removed, set it aside for safekeeping as you will need it later in the installation process.
Step 3⁚ Install the Surface Orifice
The surface orifice is a small, brass fitting that controls the flow of gas to the burner. It is usually located on the gas valve, which is located beneath the cooktop. The LP conversion kit will include a new surface orifice specifically designed for propane. To install the new surface orifice, first locate the old one and carefully remove it using a wrench or socket. Next, screw the new surface orifice onto the gas valve by hand until it is snug. Then, use a wrench or socket to tighten the orifice securely. Do not overtighten it as this could damage the valve. After tightening the new surface orifice, make sure it is seated properly and there are no leaks. Repeat this process for each burner on the cooktop.
Step 4⁚ Adjust the Bake Burner
The bake burner is located in the oven and requires a different orifice size for propane compared to natural gas. Your LP conversion kit will include the correct orifice for the bake burner. To adjust the bake burner, first locate the orifice. It is usually a small, brass fitting located on the gas valve or the burner itself. Use a wrench or socket to loosen the existing orifice and remove it. Then, carefully screw the new LP orifice onto the valve or burner. It should tighten securely. After installing the new orifice, test the bake burner by turning on the oven and checking the flame. If the flame is too high or too low, adjust the orifice slightly until you achieve a proper flame. Remember to always use caution when working with gas appliances and follow the instructions provided in your LP conversion kit.
Step 5⁚ Test for Leaks
After installing the LP conversion kit, it’s crucial to test for any gas leaks before using your range. Leaks can be dangerous and should be addressed immediately. To test for leaks, you can use a gas leak detector fluid or soapy water. Apply the fluid or soapy water to all connections, joints, and hoses. If bubbles appear, it indicates a leak. If no bubbles appear, the range is safe to operate on propane. You can also use a gas leak detector specifically designed for propane to check for leaks. If you detect a leak, tighten the connection or replace the faulty component. Never attempt to fix a leak yourself if you are unsure of the problem. Consult a qualified technician for repairs. Remember to always follow the safety precautions outlined in your LP conversion kit manual. By taking these steps, you can ensure a safe and enjoyable cooking experience with your converted range.
Troubleshooting
While the LP conversion process is relatively straightforward, you might encounter some issues during the installation or after using the converted range. If your range doesn’t ignite properly, check the gas supply valve to ensure it’s open. If the burner flames are too high or too low, adjust the orifice size. Refer to the instructions included with the LP conversion kit for specific adjustments. If the flames are yellow or orange instead of blue, it could indicate insufficient air supply. Check the burner venturi and ensure it’s clear of any obstructions. If you experience any persistent problems, it’s best to consult a qualified technician. They have the expertise to diagnose and repair any issues related to your LP conversion kit and range. Remember, safety should always be your top priority. If you have any doubts or concerns, don’t hesitate to seek professional help.
Converting your Frigidaire gas range to LP gas is a relatively simple process, especially if you follow the instructions provided with the conversion kit. You’ve now successfully transformed your range to use propane, ensuring a reliable and efficient cooking experience. Remember to double-check your work and ensure the gas supply is on. Use a gas leak detector fluid or soapy water to check for any leaks. If you don’t find any bubbles, your range is safe to operate on propane. Always prioritize safety when working with gas appliances. If you have any doubts or concerns, consult a qualified technician. Enjoy the benefits of using LP gas in your Frigidaire range, and happy cooking!
Where to Find the Kit
Finding a Frigidaire LP Conversion Kit is easier than you might think! You can purchase them from various sources, including online retailers like Amazon, appliance parts suppliers like AppliancePartsPros.com, and even directly from Frigidaire’s official website. When searching, be sure to specify the model number of your Frigidaire range to ensure you get the correct kit. Many online retailers also offer reviews and comparisons of different conversion kits, helping you make an informed decision. If you’re unsure about the right kit for your appliance, contact Frigidaire customer support or a qualified appliance technician for assistance. Remember, using the correct conversion kit is crucial for safe and efficient operation of your gas range.
Additional Resources
For further assistance or more detailed information on Frigidaire LP Conversion Kits, there are several valuable resources available. The Frigidaire website provides a comprehensive Owner Center with access to product support guides, manuals, FAQs, how-to videos, and even cleaning and care tips. If you need to contact Frigidaire directly, their customer service department can answer questions and provide guidance on your specific appliance. Additionally, online forums and communities dedicated to appliance repairs and maintenance often have helpful discussions and tips from experienced users. You can also consult with a qualified appliance technician for personalized guidance and professional installation assistance. These resources can help you troubleshoot any issues you encounter during the conversion process and ensure your Frigidaire range operates safely and efficiently on propane gas.