HPF-PS10 Manual⁚ A Comprehensive Guide

This comprehensive manual provides a detailed guide to the HPF-PS10, a 10-amp remote power supply with battery charger. It covers installation, operation, troubleshooting, technical specifications, and safety precautions. This manual is a valuable resource for anyone installing, configuring, or maintaining the HPF-PS10, whether you’re an A&E, dealer, installer, or end user.

Introduction

The HPF-PS10 is a high-performance, 10-amp remote power supply with a built-in battery charger designed for use in fire alarm systems. It is a versatile and reliable power source that can be used in a variety of applications, including standalone power supply or in conjunction with a fire alarm control panel (FACP). This manual provides a comprehensive guide to the HPF-PS10, covering its key features, installation, operation, troubleshooting, and maintenance. This manual is intended for use by qualified personnel who are familiar with fire alarm systems and electrical safety practices. It is essential to read and understand this manual before installing, operating, or maintaining the HPF-PS10.

The HPF-PS10 is a direct replacement for the FL-PS10/SK-PS10 and provides 24 VDC power for Notification Appliance Circuits (NACs) configured as either Class B or Class A. It features a filtered 24 VDC output that can be configured to drive up to seven Class B NACs. The HPF-PS10 also offers ADA-compliant strobe synchronization, ensuring that strobe lights operate in sync with audible alarms. The HPF-PS10 is a key component in ensuring the reliability and effectiveness of fire alarm systems, providing continuous power in the event of a power outage and supporting the operation of critical fire safety devices.

Key Features and Benefits

The HPF-PS10 is a powerful and versatile remote power supply designed to meet the demanding requirements of modern fire alarm systems. It boasts a range of features and benefits that enhance its performance, reliability, and ease of use. Some of the key features of the HPF-PS10 include⁚

• 10 Amp Capacity⁚ The HPF-PS10 provides a robust 10-amp output, capable of powering a wide range of fire alarm devices, including notification appliances, detectors, and control panels.
• Battery Charger⁚ The built-in battery charger ensures a continuous power supply, even in the event of a power outage, guaranteeing the uninterrupted operation of critical fire safety equipment.
• Configurable Outputs⁚ The HPF-PS10 offers seven configurable outputs, allowing for flexible and efficient power distribution to meet the specific needs of various fire alarm system configurations.
• LED Diagnostics⁚ LED indicators provide clear visual status updates, facilitating quick and easy troubleshooting of potential issues.
• ADA-Compliant Strobe Synchronization⁚ The HPF-PS10 ensures seamless synchronization of strobe lights with audible alarms, enhancing the overall effectiveness of fire alarm systems and ensuring compliance with accessibility regulations.
• Direct Replacement⁚ The HPF-PS10 serves as a direct replacement for the FL-PS10/SK-PS10, offering a seamless upgrade path for existing fire alarm systems.

These features and benefits make the HPF-PS10 a valuable asset for any fire alarm system, ensuring reliable power, flexibility, and ease of operation.

Installation and Setup

Installing and setting up the HPF-PS10 is a straightforward process, but it’s essential to follow the instructions carefully to ensure proper operation and safety. The installation manual provides a detailed guide, covering all aspects of the installation process, from mounting the unit to connecting the wiring.

Before beginning installation, it’s crucial to ensure that the location chosen for the HPF-PS10 meets the requirements outlined in the manual. This includes factors such as ambient temperature, humidity, and proximity to other equipment. The installation process involves mounting the HPF-PS10 securely to a suitable surface, ensuring proper ventilation, and connecting the wiring to the appropriate terminals. The wiring connections should be made carefully, ensuring that the correct polarity is maintained to avoid damage to the unit.

Once the HPF-PS10 is physically installed, it’s necessary to configure the unit to meet the specific requirements of the fire alarm system. This involves setting the desired output voltage, configuring the outputs to match the intended applications, and setting up any necessary synchronization or communication protocols. The configuration process can typically be accomplished using a programming tool or software provided by Honeywell, allowing installers to customize the HPF-PS10 to seamlessly integrate with the existing fire alarm system.

Operation and Configuration

The HPF-PS10 operates as a reliable remote power supply, providing 24 VDC power to various fire alarm system components. Its key function is to ensure continuous power to these components, even in the event of a power outage. The HPF-PS10 features a built-in battery charger that maintains the battery’s charge, ensuring that the system remains operational during power interruptions. The unit’s configurable outputs allow you to tailor its power distribution to meet the specific needs of your fire alarm system.

The HPF-PS10 provides power to Notification Appliance Circuits (NACs), which are dedicated circuits for fire alarm signaling devices such as horns, strobes, and speakers. The unit’s outputs can be configured to support both Class B and Class A NACs, offering flexibility in system design. For Class A NACs, the unit requires the use of a ZNAC module to ensure proper operation. The HPF-PS10 also provides auxiliary power for various other fire alarm system components, such as detectors, annunciators, and door holders.

Configuration of the HPF-PS10 involves setting the desired output voltage, configuring the outputs to match the intended applications, and setting up any necessary synchronization or communication protocols; This can typically be accomplished using a programming tool or software provided by Honeywell, allowing installers to customize the HPF-PS10 to seamlessly integrate with the existing fire alarm system.

Troubleshooting and Maintenance

Regular maintenance is essential for ensuring the reliable operation of the HPF-PS10. This involves visually inspecting the unit for any signs of damage, such as loose connections, broken wires, or physical damage to the enclosure. It is also crucial to check the battery connections and ensure they are secure and free from corrosion. Periodically testing the battery’s charge is also essential to guarantee it can deliver the necessary power during a power outage. Refer to the HPF-PS10 manual for recommended battery testing intervals and procedures.

Troubleshooting the HPF-PS10 typically involves identifying and addressing any issues that may be affecting its functionality. The unit is equipped with LED diagnostics that provide visual indicators of its operating status. These LEDs can help identify problems such as AC power failure, battery problems, or output circuit faults. In case of malfunction, consult the HPF-PS10 manual for troubleshooting guides and diagnostic codes. If the issue cannot be resolved through basic troubleshooting steps, contacting a qualified technician is recommended.

Maintaining the HPF-PS10 involves keeping the unit clean and free from dust and debris. Avoid using harsh chemicals or solvents for cleaning, as these could damage the unit’s components. Regularly checking the HPF-PS10’s operation and performing maintenance procedures will help ensure its long-term reliability and optimal performance, contributing to the overall safety and security of the fire alarm system.

Technical Specifications

The HPF-PS10 is a powerful and versatile remote power supply designed to meet the demanding requirements of modern fire alarm systems. It boasts a robust 10-amp output capacity, enabling it to power a variety of notification appliances and circuits, including Class B and Class A NACs. The HPF-PS10 is equipped with a built-in battery charger, ensuring reliable backup power in the event of an AC power outage. Its compatibility with both 12- and 24-volt fire alarm control panels (FACPs) provides flexibility in system integration.

Key technical specifications of the HPF-PS10 include⁚

• Output current⁚ 10 amps
• Output voltage⁚ 24 VDC
• Input voltage⁚ 120 VAC (HPF-PS10B) or 240 VAC (HPF-PS10E)
• Battery capacity⁚ Up to 33 AH (in a separate enclosure)
• Number of configurable outputs⁚ 7
• Dimensions⁚ 11.75″ x 7.75″ x 4.5″ (H x W x D)
• Weight⁚ 10 lbs (approximate)

The HPF-PS10 also incorporates features like ADA-compatible strobe synchronization and filtered 24 VDC output, ensuring compliance with industry standards and providing a reliable power source for critical fire alarm applications. These technical specifications highlight the HPF-PS10’s capabilities and suitability for various fire alarm installations. For detailed information about specific features and performance characteristics, refer to the HPF-PS10 instruction manual.

Compatibility and Applications

The HPF-PS10 is designed for compatibility with a wide range of fire alarm systems and components, making it a versatile and reliable power source for various applications. It is compatible with both 12- and 24-volt fire alarm control panels (FACPs), offering flexibility in system integration. The HPF-PS10 is also compatible with various notification appliance circuits (NACs), including Class B and Class A NACs, allowing it to power a wide array of fire alarm devices.

The HPF-PS10’s versatility extends to its applications. It can be used as a standalone power supply, providing reliable power for critical fire alarm components in various settings. Additionally, it can be integrated into larger fire alarm systems, acting as a remote power source for NACs, detectors, annunciators, and other devices. Its compatibility with the ZNAC module enables the use of Class A NACs, expanding its application possibilities.

The HPF-PS10 is suitable for a wide range of applications, including⁚

• Commercial buildings
• Industrial facilities
• Residential buildings
• Schools
• Hospitals
• Hotels
• Retail stores

Its robust design, compatibility, and reliability make the HPF-PS10 an essential component for ensuring the safety and functionality of fire alarm systems in diverse settings. For specific compatibility information and application recommendations, refer to the HPF-PS10 instruction manual.

Safety Precautions

The HPF-PS10 is a powerful device that requires proper handling and installation to ensure safety. Before working with the HPF-PS10, it is crucial to understand and follow these safety precautions⁚

• Disconnect Power⁚ Always disconnect power to the HPF-PS10 and any connected devices before performing any installation, maintenance, or repair work. This prevents electrical shock and potential damage.
• Qualified Personnel⁚ Installation, maintenance, and repair of the HPF-PS10 should be performed by qualified and trained personnel. They are equipped with the necessary knowledge and safety protocols to work with electrical equipment.
• Fire Hazards⁚ The HPF-PS10 contains a battery that may pose a fire hazard if mishandled. Avoid placing the unit near flammable materials or in areas with high temperatures. Proper ventilation is crucial to prevent overheating and potential fire hazards.
• Battery Disposal⁚ Follow all local regulations and guidelines for proper battery disposal. Never dispose of batteries in household trash. Recycling or specialized disposal methods should be used to minimize environmental impact.
• Safety Equipment⁚ Always wear appropriate safety gear, including eye protection, gloves, and insulated tools when working with the HPF-PS10 or its components. This protects you from potential electrical hazards and injuries.
• Grounding⁚ Ensure the HPF-PS10 is properly grounded to prevent electrical shock and ensure proper operation. Refer to the installation manual for specific grounding instructions.

By adhering to these safety precautions, you can minimize risks and ensure a safe working environment when installing, maintaining, or using the HPF-PS10. Always consult the HPF-PS10 instruction manual for detailed safety information and specific instructions related to your application.

Warranty and Support

Honeywell provides a comprehensive warranty for the HPF-PS10, ensuring peace of mind and protecting your investment. The specific warranty terms and conditions can vary depending on your region and purchase date. However, generally, the HPF-PS10 comes with a limited warranty that covers defects in materials and workmanship for a specified period. For detailed warranty information, including duration and coverage, refer to the accompanying documentation or visit the Honeywell website.

Beyond the warranty period, Honeywell offers ongoing support and resources to assist you with any questions, troubleshooting, or maintenance needs. You can access a variety of support options, including⁚

• Online Resources⁚ Honeywell’s website provides a wealth of information, including user manuals, FAQs, troubleshooting guides, and technical specifications for the HPF-PS10. These resources can be helpful for resolving common issues or understanding the device’s functionality.
• Customer Support⁚ Honeywell offers dedicated customer support channels for assistance with product-related inquiries. You can contact their support team via phone, email, or online chat for personalized help and expert guidance.
• Authorized Dealers⁚ Honeywell has a network of authorized dealers who can provide local support, installation, and maintenance services for the HPF-PS10. Contact your local dealer for assistance with installation, repairs, or any other needs.

By leveraging these support resources, you can access the information and assistance you need to ensure the optimal performance and longevity of your HPF-PS10.